Heavy Duty Woven Wire Mesh
1.98mm hole heavy duty mesh in top quality 304 grade stainless steel made from 0.56mm wire. As you can see from the image, this is a heavy woven mesh specification. 1.98mm aperture is fairly large to be woven to form a mesh netting, as a consequence it requires a thick wire to produce.
The Mesh Company is one of the leading suppliers of stainless steel wire mesh in the United Kingdom. Additionally, in addition to stocking only the best products, we provide the most helpful customer service by providing bespoke cutting and fast shipping.
We are the best suppliers for your needs because:
- FREE UK delivery on all orders
- Orders dispatch within 24 hours of order
- Located in Warrington, UK which is the UK home of mesh and metals
- Our experienced staff are experts in the mesh market and care personally about your customer experience
Wait!! Before you order your mesh please first check out our clearance listing which is where we put all of our over-run bargain rolls at reduced prices. You never know, you might find just the roll that you need for your purposes,
The Mesh Company has an enormous range of wire mesh products. We truly are an industry leader among suppliers of weld mesh and woven wire materials. With the capabilities we have in-house, we can provide virtually anything you require. Chicken wire, insect meshing and rodent mesh materials are also available in large stock quantities at bargain prices.
What Can I Do With This Metal?
Below is a quick breakdown of the key characteristics of this type of stainless steel mesh:
- Bending & Forming – Good. You could bend this mesh by hand and it would retain its shape
- Corrosion Resistance – Very good. 304 grade stainless steel offers good resistance to many corrosive elements, however 316 is preferable for marine and aquatic applications
- Heat Resistance – Good. 304 grade stainless steel offers a good level of resistance to heat
- Machinability – Good. Mild steel is the metal choice for many forms of machining and grinding, but stainless steel can also offer good results
- Welding – Very good. You could easily weld with this mesh to suit your requirements
- Painting – Poor. We suggest that a mild steel product is used when a layer of paint needs to be applied. Galvanised and stainless steel will not take paint
This heavy duty mesh is one of the best methods of pest control to deter and block rodents. Our 1mm and 2mm hole heavy duty rodent wire mesh is ideal for blocking holes, airbricks and vents of all shapes and sizes.
Using the Mesh Company’s Rodent Mesh, you can prevent rodents of all sizes from entering your property. The process of rodent proofing is one of a series of steps you should take to ensure the safety of your building against rats, mice, or squirrels. Rodent infestations may lead to serious consequences, including the spread of disease and deterioration of hygiene.
By blocking off potential entry points, rodents can be prevented from entering. You should use a rodent proof sealant or wire mesh to block off possible entry points. Rodent proof wire mesh is a low-cost product that can be effectively utilized by both professionals and individuals.
If rodents wish to gain access to almost any environment in the home, this type of stainless steel is the ideal choice.
Wire Mesh Specification
Below are the specifications of this 0.56mm wire thickness heavy duty mesh:
- Mesh Count = 10 holes per linear inch
- Holes / Wires Per Square Inch = 100 holes per square inch
- Wire Thickness = 0.56mm
- Hole Size / Aperture = 1.98mm
- Open Area % = 60.77%
- Cut With – Tin snips, guillotine or angle grinder
You would be able to use this mesh as a sieve to filter out any particle that you require smaller than 1.98mm.
About The Mesh
You will find this metal mesh to be of interest if you require very strong product for a filtration application. The stainless steel wire used to make this heavy duty mesh is 304 grade, which provides excellent corrosion resistance.
Due to the thick wire diameter of this 2mm hole heavy duty wire mesh would be ideal for rodent proofing, but would not be suitable for use as insect mesh.
Cutting would require the use of industrial tools. We cut this thickness of steel mesh using a guillotine in our factory.
Plain weave is the main type of wire mesh offered by The Mesh Company. This mesh is produced by crossing each warp wire alternately above and below every weft wire and vice versa. Warp and weft wires are normally of the same diameter.
Most commercial applications and filtration systems requiring high flow rates use this type of mesh.
We suggest that you look into the products in our welded mesh section if you require a mesh product where the wires are fixed in place. Welded mesh is commonly available in galvanised steel, but we also offer stainless steel.
SS304 is a non-magnetic stainless steel grade. Magnets will not stick to this grade of metal. In industry, this is the most common stainless steel grade. A huge variety of applications are possible with this product.
SS304 also has outstanding forming and welding characteristics.
This grade of stainless steel is austenitic. This means that when it is cool the iron element remains in the form of austenite (gamma iron). This is a phase of iron that is nonmagnetic.
Above all, 304 grade stainless steel is long lasting in almost all environments. For instance, this mesh would last for upwards of 20 years if used for standard internal applications.
About The Mesh Company
In 2008 Locker Wire Weavers launched The Mesh Company to bring our enormous range of wire mesh products to the general public for the first time. Previously wire mesh was only available for trade customers.
We continue to extend our range, and now proudly offer many forms of mesh and metal products for the best possible prices. We specialise in woven wire mesh. As a group we work closely with architects and designers to develop ground-breaking new applications for our multifunctional range of materials. We also offer state of the art fabrication and engineering for projects of all sizes.
Strong ties with the Warrington community continue to be at the very core of our business. We are proud to invest in the training and developing our staff of all levels in line with the traditions set by Thomas Locker, who founded our group 150 years ago when he invented the electronic loom. We continue to bring ingenuity and strong ethics to our day to day business.
The Mesh Company continues Warrington’s historic role in the wire industry. For more than 140 years, our group has been a leader in the supply and manufacture of woven wire mesh and wire cloth. Having been founded in Warrington, UK in 1878, Locker mesh products still retain the quality craftsmanship and spirit of innovation that were so characteristic then.
You will find the range of mesh panel sizes available here offer a wide range of options, that have been designed to suit most requirements. Please be advised that the majority of woven mesh is usually available in a maximum roll size of 30 metres by 1200mm. Please email us if you wish to discuss purchasing these larger sheets – firstname.lastname@example.org.
Feel free to call us if you wish to discuss any of our products – (+ 44) 01925 406 602. We are always happy to help in any way that we are able to.
We also offer this product through our highly popular eBay store, check us out there too.
There are no reviews yet.