3mm Round Hole Galvanised Steel Perforated Metal Sheet – 5mm Pitch – 1mm Thick

Description

Galvanised Steel Round Hole

3mm round hole galvanised steel perforated metal is produced by punching flat galvanised plate with a specific pattern. The customer’s requirement for metal for cosmetic or application purposes drives this decision.

This premium product is crafted from 1mm thick flat sheet galvanised steel, a material treated with a zinc coating to resist rust and corrosion. The perforated metal comes with 3mm aperture round holes and a 5mm pitch, which is the distance from the start of one hole to the next, or the sum of the hole size and the gap between holes. This design ensures versatility, durability, and suitability for a wide array of applications, from filtration and ventilation to screening. The galvanised steel construction guarantees strength, durability, and resistance to wear and tear, making it apt for both indoor and outdoor applications. Moreover, our product is eco-friendly; galvanised steel is recyclable, and the galvanisation process prolongs the steel’s lifespan, minimizing the need for frequent replacements and contributing to a more sustainable environment.

Specification Of This Mesh:

• Hole Size (Aperture) – 3mm round hole
• Pitch – 5mm. You can measure the pitch from the start of one hole to the next or the hole size plus the gap between the hole
• Thickness – 1mm thick flat sheet

Sheets with perforations are commonly used to allow air to pass through. Ventilation and filtration are the main uses for this mesh type. Rodent proofing is another use for perforated sheeting.

Why Choose The Mesh Company?

Our group have been in the mesh industry for over 150 years. We are one of the UK’s most trusted metallic mesh suppliers because:

• Quality products: We offer high-quality products that are designed to meet the needs of a wide range of customers. 
• Wide range of products: We are known for offering a wide range of products, including mesh, fencing, netting, and other related products. 
• Experienced staff: Our staff are knowledgeable, experienced, and can provide expert advice and assistance to customers. This can be especially helpful for customers who are unsure about which product to choose or who have specific requirements. We also regular write blogs and help guides to help explain what our materials can be used for. 
• Competitive prices: We are sure that our prices are always the lowest around. This makes us an attractive option for customers who are looking for a cost-effective solution.
• Customer service: The Mesh Company place a high priority on service and offer excellent support and assistance to our customers. This can help to ensure that you will have a positive experience when working with The Mesh Company.

We also offer a massive range of hexagonal hole galvanised metal sheet options from immediate stock.

In order to produce galvanised steel hexagonal perforated metal mesh sheet, flat sheet metal is punched with a hexagonal hole. Perforated sheets are commonly often used in applications where the passing of air is required. Because the holes are punched, it is possible to have a far stronger finished metal product than it would be for the equivalent thickness in woven or welded mesh.

FAQs For This Product

Can Perforated Metal Mesh Be Painted or Coated?

Yes, perforated metal mesh can be painted or coated. In the event that you want to apply any kind of paint or coating to the surface, it is imperative to properly prepare it. It is very important for the metal mesh to be clean, dry, and free of any dirt, grease, or oil on the surface of the mesh. If there is any rust or corrosion on the surface, it should be removed, and the surface may need to be primed to ensure a proper adhesion between the paint or coating and the surface. A paint or coating must also be selected that is suitable for the type of metal that is going to be used as well as the intended use of the metal. For example, galvanised steel perforated metal mesh may require a special primer and paint that are formulated for use on galvanised surfaces. In addition, some coatings may offer additional benefits, such as increased corrosion resistance or UV protection.

How Is Perforated Metal Mesh Made?

In order to make perforated metal mesh, a machine called a perforating press or a punch press machine is used that punches holes into a sheet of metal after it has been heated. The process begins with a roll or sheet of metal, which is fed into the perforating press. The press is equipped with a die and a series of pins or punches that are aligned in a specific pattern, corresponding to the desired hole size and spacing. As the metal passes through the press, the punches are forced through the metal, creating a series of holes. It is then necessary to cut the perforated metal mesh to the desired size, and, if necessary, to apply a coating in order to increase its durability or aesthetic appeal. As a result of this process, a wide variety of hole sizes, patterns, and configurations can be created, making perforated metal mesh a versatile and customizable material.

Check out our blog about galvanised steel perforated metal mesh for more information on that large range of materials. 

Our goal for our blogs and help guides is to answer as many questions as possible to help to explain the possibilities of mesh to our customers. 

Contact our team today if you have any questions at all. We are always really keen to help in any way that we can. 

We also offer similar products through our highly popular eBay store, check us out there too.